Minggu, 01 Januari 2012
CAMWorks 2011 v.SP2.0 Multilanguage for SolidWorks 2010 - 2011 (x86/x64) | 1.01 GB
CAM (Computer Aided Manufacturing) Works - a module for creating control programs for CNC machines.
Programming milling, turning, turning, milling and wire EDM module means CAMWorks.
- Module CAMWorks allows you to create programs milling, turning, turning, milling and wire EDM. The following types of machines: milling with simultaneous control of two? five axles;
- CNC single and duplex, with one or two slides, with a programmable servo-mechanism (tailstocks, lunettes, catcher details ...);
- Turning and Milling single and duplex, with one or two slides, with a programmable servo-mechanism, with simultaneous control of two? five axles;
- Erosion of the two-and chetyrehosevye.
Treatment is carried out directly in SolidWorks and directly on the model of SolidWorks. The results of the programmer are stored in the same model part or assembly SolidWorks. This provides full associativity of the model and tool path that leads to the automatic renewal of the tool path when the model changes. When added to the SolidWorks model of any process data, such as designations of the roughness, base, tolerances of form and arrangement of surfaces, tolerances on dimensions, engineer-programmer always has immediate access to them, which facilitates the selection scheme based on the machine parts and the selection needed to ensure a given quality of parts of the tool and cutting conditions. Detail can be easily adapted to the needs of processing by, for example, to eliminate redundant elements in terms of handling the geometry or by applying to the executive in mid-size model of the tolerance. While working with the SolidWorks assembly can perform a joint processing of multiple parts, the processing of a series of program details, or just completely simulate all the real situation on the machine table - all of snap, logging of any complexity, and so on - for the most complete account the realities of treatment at the early stages of create a program
System requirements:
SolidWorks Version 2010-2011 Win32 amp; Win64, MS Access 2003-2010 32bit only!
Operating System MS Windows XP/Vista/Win7, Server 2003 - 32 amp; 64bit
Graphics 1024x768 resolution with minimum 32 768 colours
Disk Space 10GB free
Memory 1GB + RAM (2GB recommended)
Download:
http://www.filesonic.com/file/1610258531/CAMWorksSP20.part1.rar
http://www.filesonic.com/file/1610099641/CAMWorksSP20.part2.rar
http://www.filesonic.com/file/1610081341/CAMWorksSP20.part3.rar
Or :
http://www.fileserve.com/file/97XbQmC/CAMWorksSP20.part1.rar
http://www.fileserve.com/file/uNMGrpT/CAMWorksSP20.part2.rar
http://www.fileserve.com/file/NNuRPX3/CAMWorksSP20.part3.rar
Rating: 4.5
Reviewer: Unknown
ItemReviewed: CAMWorks 2011 v.SP2.0
